Golf Shop: GOLFSMITH Putter Grip Alignment Jig

Putter Grip Alignment Jig This innovative alignment device from Golfsmith ensures that the accurate installation of flat-front, non-round putter grips is quick and easy. Clamp the putter by the shaft in a gripping device with the face of the putter positioned straight up and down to the workbench. Install the putter grip. While the grip is still wet on the grip tape, place the Putter Grip Alignment Jig on the top of the flat front surface of the grip. Turn the grip until the cross-hatch laser lines are positioned so that the vertical laser line is parallel with the top line of the putter. Laser cross-hatch lines can be calibrated by rotating the front of the laser with the alignment tool laid flat on the top of the workbench. FDA-approved laser slides into a slot in the jig to allow for any offset amount a putter may have. Uses one LR41 watch battery; included. Instruction manual (2Mb)